01067050907

Info@easacc.com

الاستشارات التقنية

التصنيفات
ads

Hex shank socket set

After working in a humid environment, they are likely to rust quickly.

An important parameter is the depth of the head, in the reviewed set it is 8 mm. I got such a groove in just 30-40 seconds of working with a needle file. On each of the heads there is a stamp of its size, it is also duplicated with white paint on the holder.As you can see in the photo, the paint is a little worn off, it was corroded by the small amount of oil in which it was in the blister.Each of the heads has no removable hex
shank C 1/4” and 22 mm long. Naturally, such a tool can easily cope with the tightening and unscrewing of various bolts, nuts, clamps. Seven of which are metric and seven are inch. The head of the screw in the head also has backlash. The whole set of bits is securely fixed in a hard plastic holder (except for the 12mm bit, it tends to pop out of its seat). That’s all, all the best! Review published in accordance with clause 18 of the Rules In the description on the product page it is indicated that the tool is made of chrome-vanadium steel. Of course, it’s hard to believe, just in case, I tried to rub it with a needle file for one minute, that’s what came out of it. The product was provided for writing a review by the store.
The drill was not expensive, so the heads were of appropriate quality. Good afternoon everyone! This time I got a small set of socket bits for review.
The internal size of the heads fully corresponds to the face value, in any case, measured by me – metric. And so we have heads of the following denomination: 5; 5.5; 6; 7; eight; ten; 12mm & 3/16" (4.76mm), 1/4" (6.35mm), 9/32" (7.14mm), 5/16" (7.93mm), 11/32" (8.73mm), 3/ 8" (9.53mm), 7/16" (11.11mm). None broke. The set includes 14 socket bits. Everyone would be able to purchase what he needs without overpaying for unnecessary items.

Hex shank socket set

It’s all about the integrity of the design. In sum, these backlashes do not favorably affect the convenience of work. An advantageous difference from my previous set is the wall thickness, here it is 2 mm compared to 1.3 of the old one. So the review of the subject will be based on the experience of using my old tool. Perhaps for someone it will be a minus the lack of magnets in the inside of the head. not the best indicators, but in comparison with my old set – still nothing. But I’m more interested in how he will cope with power loads. Unfortunately, it was not possible to screw capercaillie with a diameter of 8 mm due to the lack of a 14 mm head in the set. For those who are interested, the details are under the cut.
Of the minuses of the reviewed set, I note the absence of any coating on the instrument. In the old set, the head is mounted on a special holder, which is undoubtedly convenient for a quick head change, but there is a slight backlash in this connection (in my copy). In general, I liked the tool, I hope it will be a reliable assistant. The total length of the bits is between 35 and 39 mm. The set is supplied packed in a blister. Watch the video: By the way, it turned out to be more convenient to screw capercaillie using this set in comparison with my old one.
It’s time to get to work.

But, be that as it may, they helped out repeatedly and have not yet worked out their own. Before I got acquainted with the reviewed product, I used a set of heads that I got complete with a drill. Personally, I don’t really need inch ones, I think it would be more logical if these were two different sets. Since it is often necessary to tighten the so-called capercaillie (wood screws with a hexagonal head) with a threaded part diameter of 6-8 mm
The Bits did their job. For the purity of the experiment, the capercaillie were screwed in without pre-drilling the workpiece.