01067050907

Info@easacc.com

الاستشارات التقنية

التصنيفات
ads

Hex shank socket set

After working in a humid environment, they are likely to rust quickly.

An important parameter is the depth of the head, in the reviewed set it is 8 mm. I got such a groove in just 30-40 seconds of working with a needle file. On each of the heads there is a stamp of its size, it is also duplicated with white paint on the holder.As you can see in the photo, the paint is a little worn off, it was corroded by the small amount of oil in which it was in the blister.Each of the heads has no removable hex
shank C 1/4” and 22 mm long. Naturally, such a tool can easily cope with the tightening and unscrewing of various bolts, nuts, clamps. Seven of which are metric and seven are inch. The head of the screw in the head also has backlash. The whole set of bits is securely fixed in a hard plastic holder (except for the 12mm bit, it tends to pop out of its seat). That’s all, all the best! Review published in accordance with clause 18 of the Rules In the description on the product page it is indicated that the tool is made of chrome-vanadium steel. Of course, it’s hard to believe, just in case, I tried to rub it with a needle file for one minute, that’s what came out of it. The product was provided for writing a review by the store.
The drill was not expensive, so the heads were of appropriate quality. Good afternoon everyone! This time I got a small set of socket bits for review.
The internal size of the heads fully corresponds to the face value, in any case, measured by me – metric. And so we have heads of the following denomination: 5; 5.5; 6; 7; eight; ten; 12mm & 3/16" (4.76mm), 1/4" (6.35mm), 9/32" (7.14mm), 5/16" (7.93mm), 11/32" (8.73mm), 3/ 8" (9.53mm), 7/16" (11.11mm). None broke. The set includes 14 socket bits. Everyone would be able to purchase what he needs without overpaying for unnecessary items.

Hex shank socket set

It’s all about the integrity of the design. In sum, these backlashes do not favorably affect the convenience of work. An advantageous difference from my previous set is the wall thickness, here it is 2 mm compared to 1.3 of the old one. So the review of the subject will be based on the experience of using my old tool. Perhaps for someone it will be a minus the lack of magnets in the inside of the head. not the best indicators, but in comparison with my old set – still nothing. But I’m more interested in how he will cope with power loads. Unfortunately, it was not possible to screw capercaillie with a diameter of 8 mm due to the lack of a 14 mm head in the set. For those who are interested, the details are under the cut.
Of the minuses of the reviewed set, I note the absence of any coating on the instrument. In the old set, the head is mounted on a special holder, which is undoubtedly convenient for a quick head change, but there is a slight backlash in this connection (in my copy). In general, I liked the tool, I hope it will be a reliable assistant. The total length of the bits is between 35 and 39 mm. The set is supplied packed in a blister. Watch the video: By the way, it turned out to be more convenient to screw capercaillie using this set in comparison with my old one.
It’s time to get to work.

But, be that as it may, they helped out repeatedly and have not yet worked out their own. Before I got acquainted with the reviewed product, I used a set of heads that I got complete with a drill. Personally, I don’t really need inch ones, I think it would be more logical if these were two different sets. Since it is often necessary to tighten the so-called capercaillie (wood screws with a hexagonal head) with a threaded part diameter of 6-8 mm
The Bits did their job. For the purity of the experiment, the capercaillie were screwed in without pre-drilling the workpiece.

التصنيفات
ads

No keyword I checked all the salad…

I have an i486 kit, working. People who are engaged in refining (the process of cleaning or separating noble precious metals and additional impurities) of radio components, sometimes the plastic of the cases is dissolved … you can peep solutions from them

No keyword

I checked all the salad bowls and glasses, everything is glaring, the strongest made in the days of the USSR … yes, yes, of course… there are computers at work, assembled back in 2004,… they work for a sweet soul. Crystal tableware does not emit radon, therefore, as an exhibit behind glass, it will not bring harm. I solemnly promise to never write about antennas and vector analyzers again." — No, no, you write… come in handy 🙂 But it is undesirable to store food https://jiji.ug/279-toasters liquids and products in it. "… I don’t know why 🙂 This is what they write – “Glasses, wine glasses, salad bowls made of crystal are beautiful and exquisite. But this resonant transparent material is fraught with the danger of radiation due to the presence of lead in it, which is not only toxic, but can also be radioactive.

التصنيفات
ads

Sades A6 gaming headset with built-in 7.1 virtual sound

Fixing the headphones on the head provides a padded headband secured with a stretchable band. It positions itself as a world-class brand. The seller was not very zealous with the packaging, so the box, as expected, crumpled during shipment, because it is made of rather thin cardboard.
The feature of this model is a metal frame, due to which the headphones have greater strength and bending resistance compared to their plastic counterparts. I tried to consider them in more detail, since it was the presence of built-in 7.1 sound that interested me in this headphone model.
The total weight of the headphones is 336 g, the weight of the head part alone is 256 g. The front side differs from the back only in the presence of a microphone. Microphone impedance: up to 2.2 kOhm – Unique remote design for easy sound control.
The design of the headphones is completely symmetrical. Cable length: 2.2 m The interface cable holder and the microphone cable are designed to be kink-resistant.
Headphone manufacturer Sades specializes in various accessories for gamers – headphones and headsets, keyboards, mice, computer chairs and tables.
Like most gaming headsets, Sades A6 has full-size headphones that provide isolation from external noise to achieve the effect of complete immersion in the gameplay. Frequency response: 20 – 20,000 Hz
The headphone speakers are covered with an orange fabric with a mesh on top.
Ear pads are made of very soft, pleasant to the touch leatherette with foam rubber filling. Interface: USB You can, for example, even turn the headphones 180 degrees relative to each other, although why? 🙂

– Attractive orange backlighting,

Speaker diameter: 40 mm,

– 7.1-channel simulated surround sound driver provides immersive gaming experience and precise location, This headset has already been reviewed a couple of times on the music, but some points, in particular those related to the hardware implementation of sound, software installation nuances and driver features, were not touched upon.
The arcs of the frame are threaded into plastic spacers and fixed in the T-shaped holders of the earcups.
I will give them here with a translation into Russian: Maximum power: 15 mW
The key features of this headset are illustrated on the side of the box:
Thanks to automatic adjustment and low weight, the headphones are practically not felt on the head and do https://jiji.com.gh/cars/mazda-cx_7 not cause any discomfort.
The microphone is mounted on a flexible base, thanks to which its position is fully adjustable within 12 cm of its cable length. The delivery set consisted of the headphones themselves, a driver disk, Chinese-English instructions for setting up the headphone software and a warranty card: The Sades A6 headphones came in a colorfully designed box, as is usually the case for gaming computer components.
On the reverse side, the main characteristics of the headset are listed in six languages ​​(no Russian). It is difficult to say how true this is, but the company’s main website contains links to representative offices in more than 50 countries, in particular, it also has a website in Russian, which presents chairs for gamers and a large selection of gaming headsets. Sensitivity: 122 ± 3 dB Microphone sensitivity: 40 ± 3 dB Let’s move on to the review:
The top of the headband is covered with soft leatherette on which the name of the company is embossed.

Sades A6 gaming headset with built-in 7.1 virtual sound


The body of the earcups themselves is made of molded black plastic with central orange inserts with an imitation of a grid applied on top. The ear cups are freely attached to the headband and therefore also automatically adjust to the anatomical features of the ear part of the head. Impedance: 24 ohms
This design provides an intuitive headphone fit without the need for manual adjustment. Weight: 320 g

التصنيفات
ads

XANES XHP50 200A Headlamp, 5 LEDs…

These are mutually opposite statements.

Headguards are needed to shine up close. You need to choose options for lights with the top location of the buttons.

XANES XHP50 200A Headlamp, 5 LEDs, 4 modes, Type-C charging port, magnetic plate, 180° swivel

The miners’ lanterns strongly disagree with you. Thanks for the review, and how much does this miracle weigh with a battery and an elastic band on its head? Normal high beam requires a large reflector.

In terms of switching modes, lights with a side button are very inconvenient. The strobe is in the main line – I immediately cross out such lights for myself. I bought xanes "xhp50" for 26650 in a classic case, a wonderful flashlight, with built-in charging and https://jiji.co.tz/toys/spiders a battery, of course, it doesn’t smell of any cree there, but I ate my 17 watts and shone quite well, definitely brighter than convoy s2 , and only 10 bucks. Well, Petzel will not agree with you either (although it is difficult to attribute it to high-quality ones, but this is a topper for alpenugs) To press it, you will have to use the second hand each time, otherwise the lamp will move to its side.

The main LED is really XHP50, you can see the characteristic "cross" under the dome lens, dividing the diode into four sectors, the base is 5X5mm.

I regretted that I didn’t take 2-3, he gave it (I took it as a gift, but, of course, I tested it first so as not to give garbage), xanes could keep a good face with a fake LED, not releasing flashlights on "xhp90", 110, etc., with such an assortment, reading about the advantages of the original cree in the review is, of course, ridiculous. High CRI diodes would not be enough for me
I think something is wrong here.

This mode will be enough for you for any needs, both amateur and professional. When turned on, 1000lm will only shine for a couple of minutes, due to increased heat dissipation.

And it cannot be structurally stuffed into the size of the forehead.

A lantern of a trusted brand with a reliable design and convenient light and control (selected according to reviews) based on original components, and not all this rubbish from fakes and production waste, the work of "Uncle Liao’s basement", which, moreover, also different every time. It’s already possible not to talk about the overload of this combine with excesses.

التصنيفات
ads

Broadlink RM Mini-3 is a very versatile remote control

Follow the first one, press the plus sign to create the first button.
The second hint says that the buttons can be moved to a convenient place
There is no power supply, a regular flat microUSB cable 1 meter long In an hour, he ate 114 mAh from my power bank Review published in accordance with clause 18 of the Rules
Let’s try to disassemble the case, no screws or latches are visible, pry the gap between the parts of the case with a thin screwdriver You can put a timer on each button After that the template
is loaded into the application and you can immediately use it if its author has done everything right. In the "Add Remote" menu, you need to tap on the search icon in the upper right corner and type the name of the equipment you are looking for
br /> Further, everything is simple and almost logical again – we again turn to the plus sign, but now we press “Add a remote control” Well, a little about the sad.
It also weighs quite a bit, which is not surprising, because this device does not have a built-in battery. For the uninformed, let me explain – in order to perform such a seemingly simple operation, you need to press 5 different buttons on the remote control several times, not only is this a long and tedious process, but the algorithm of these clicks is so illogical that in 10 years of owning an air conditioner, I I couldn’t remember the sequence of clicks, so every year when the heat comes on, I have to shovel a bunch of manuals for the equipment available in the house in an attempt to find instructions for the air conditioner.
The equipment is not rich, the Broadlink RM Mini 3 transmitter itself, a power cable and a brief instruction in English. Well, with the sliptimer mode, LG engineers also notably screwed up by setting the minimum shutdown time to 1 hour, but during this time the head will be covered with frost.
The body of the device is completely made of plastic, the top cover is glossy, the bottom is matte.
That’s it, the connection setup is over, although according to the instructions it was necessary to look for a needle, press reset and wait for something there. This will help to revive a lost or broken remote control, but here you need to understand that if the device is rare, then there are not very many chances to find its clone in the cloud. To do this, in the "Add Remote" menu, you need to select the "Custom" icon, after which a couple of tips will appear.
To do this, press any button on the virtual remote control.
You can also configure the behavior of devices when the owner approaches the house, or vice versa, when the owner leaves, for example, the light / air conditioner / TV / (and I still don’t know what) will turn on / off automatically. I just registered in the application
Only black silicone sealant holds the lid on the top The product was provided for writing a review by the store. The size is very compact, fits in the palm of your hand.
Reading the instructions is not in our rules, so we immediately download and install the E-control application on the phone by scanning the QR code from the instructions
The same procedure will need to be done for the rest of the buttons.
Connected to my router via Wi-FI It’s not a problem, I think I’ll reinstall it now, because all the data is stored in the cloud, but it wasn’t there – everything went to dust, nothing is automatically saved, you can only force backup to the cloud (supported up to 10
In addition to creating virtual remote controls, the application allows you to create scripts for the operation of devices controlled by the broadlink, giving them some sequence of commands.
Inside polyethylene foam wrap The output is the same on / off programming mode with a thousand remote control clicks, which, in general, is also not an option and you have to fall asleep with the air conditioner turned off, since the sleep mode is again unsuccessfully designed and my wife and I categorically do https://jiji.ng/287-honey-beans not like it.
If the learning remote belongs to a popular device, then the procedure is utterly simplified.
A menu appears before us with a choice of templates by category of equipment
This is our Broadlink RM Mini 3,
we are pairing, the LED changes color from blue to white
This arrangement provides a circular signal coverage of the entire room in which the device is located, there should not be any problems with the installation of the box. Pet bag I have got such a simple remote control, if there is a need for other buttons, I will add them over time. I spent a fair amount of time customizing the remotes for my devices, until the main screen of the application looked like this Yes, actually not much: a per-minute sliptimer and different scenarios for turning on / off the air conditioner, and maybe some other devices.
By clicking on the TV icon, for example, we see the remote control prepared for setting up the TV For example, to wake up, you can program the inclusion of a radio or TV, opening the curtains or turning on the backlight, and everything that comes to mind (I haven’t got it yet, so
I’ll give someone else’s script screen from the Internet)

Broadlink RM Mini-3 is a very versatile remote control


Now it remains to choose the appropriate one for your device from the proposed options, the number next to the name means the number of uploads from the cloud of this template .
It is also possible to create a virtual remote control from scratch, if we do not found a similar remote control in the cloud and ready-made templates do not suit us either. The design of the Broadlink RM Mini-3 is strict and concise, it fits perfectly on the shelf behind the monitor, which has exactly the same black glossy frame, especially since there is also a constantly on WIFI router with an empty USB socket, there will be power from somewhere device.
With the remote control for the air conditioner, everything turned out to be very simple too, the program offered to press the power button and itself pulled out a suitable remote control from the cloud.
The consumption of this device is stable, so you can calculate the daily consumption – 2736 mAh, respectively, if there was a built-in battery, it would hardly last more than a day. The device can be used simultaneously from two different phones with two different accounts in E-control – a funny feature, but I don’t see any practical application. In my case, it was LED workspace lighting in the kitchen.
Then press the corresponding button on the physical remote control, directing it to the broadcast link, if everything is in order, the LED will start blinking, signaling the receipt of a signal, on the application screen a pop-up menu will appear confirming that the command has been successfully saved.
Then called up the pairing menu by pressing the plus sign in the upper right corner of the main screen of the application, while the broadcast LED turned blue
You can choose an icon from your phone’s gallery, take a photo, or use ready-made icons for almost all occasions To do this, the program is able to track the position of the phone via WIFI, GPS and even cell towers What do you need, boyar, you ask. Slightly pry off the top board and pull out the entire microcircuit from the slots of the housing
Set the time and repeat cycle
Any of these remotes can be pulled out with a separate shortcut on the phone’s desktop, which I did for one of the most requested remotes , but somehow I didn’t like it there and I decided to remove it from the desktop, my other applications allow you to delete shortcuts without problems, leaving the application itself intact, but here the whole application went to be deleted, which I myself automatically confirmed.
If you are a “happy” owner of an LG G0*ST series air conditioner, then you know the pain that you experience when programming the on / off timer for this brand of air conditioners from the remote control. The Broadlink RM Mini 3 device will help to realize my Wishlist, this device is a universal and intelligent remote control that is paired with the E-control application for smartphones under
IOS / Android OS control can clone real IR remotes by copying commands from them, or create virtual remotes from scratch, downloading ready-made templates of physical remotes created by other users of the device via WI FI from the cloud. In the next menu, you can select the icon image and edit the name of the button.
I clicked "Add device" and saw the only option with a tricky network address The design resembles a wireless speaker.
The application works both via WIFI and via the GSM network, that is, you can control home devices from anywhere, even from distant lands .
As it turned out, this is a simpler and faster solution, than described in the manual. You can make sure that there is no battery, only a metal plate at the bottom of the case, on the sides of which there are ventilation holes.
On the top IR diodes are fan-shaped on the board.
Why is there no battery in the design? The answer is quite simple, in standby mode, the Broadlink RM Mini 3 has a pretty good energy appetite and consumes a current of 0.11A. The box is small, cardboard, the technical characteristics of the device and its functionality are displayed on the sides.
Now you need to teach this virtual remote control the commands of the real remote control.

التصنيفات
ads

Hyundai CJC-818MV Headset

The only thing that puzzled me a little was the huge gap between the cup (the part where the speaker is installed) and the headband (the part that connects both earbuds together – the red one at the bottom). Today I want to share with you my impressions of the HYUNDAI CJC-818MV headset purchased from the Chinese marketplace jd.com. On the left "ear" is a folding microphone that turns these headphones into a headset. For me, this design element is completely irrelevant, since I don’t play games (unless I chat with someone on Skype), but during the first connection it https://jiji.com.et/158-us-visa was checked – no problems were found with the microphone. In order not to confuse where to connect which one, they differ in color and have special icons.
And on the back side, the main characteristics of the headphones inside are indicated. Headphones are delivered in the original packaging – a brown cardboard box. Personally, I use them in conjunction with a 3 meter extension. Exactly the same color inserts covering the speakers installed in the cups of this headset. However, when jd.com started giving away coupons for a specific product group, I couldn’t resist. Headphones are made of black plastic. I can not say that the headphones impressed me. But they are clearly not worth the current $ 20, for this money you can find much more interesting models.
The headband securely presses the earcups to your ears, which ensures not only their secure fit, but also good isolation of the ear from the noise of the outside world. I understand that this is a mobile connection and it is impossible to fit it absolutely tightly, but in the same Dialogs there is no such disgrace. The headband of the headphones at its base hides a relatively rigid plastic frame, which is sheathed on the outside with soft leatherette. At such moments, the Dialog monitor headphones came to my aid, purchased offline many years ago and have been serving faithfully since then. There is also an inscription indicating the manufacturer and model of the headphones.
Like many of you, sometimes I want to listen to music (or watch a movie) loudly. In the end, a month after sending, the post office gave me a huge cardboard box sealed with red JD tape, inside of which was a box with headphones. This is quite enough for comfortable use of the headset in conjunction with a computer, but this is clearly not enough to connect to a TV. You can see the route from China to Belarus here. Perhaps, for connoisseurs of high-quality music, this is critical, but for me, as a person who uses them mainly for watching movies, this is not so important.
As I said, the headband of the headphones is adjustable, thanks to which they will “sit” well, both on the head of a child and an adult. She bought here. 🙂 The seller delayed the shipment, but in the end the parcel was sent. But I somehow got used to the fact that the volume control hangs on the wire, and not built into the headphones, so at first it was a little unusual – the hand kept feeling the empty wire all the time, but now everything is fine 🙂 They are well made and neat. I didn’t have any particular complaints about the quality of the headphones.
Also on the left "ear" is the adjustment wheel
volume. To give the appearance of greater attractiveness, the lower part of the headband is red. At the time of purchase, the headphones in question cost $10.75, with a $10 discount coupon applied to the price, so they ended up costing me only 75 cents. Initially, the headphones were devoid of any smell, which is good news. The sound produced by the 40mm drivers is mediocre and quiet.
Live they look like this: On the front side of the box, you can find the name of the product inside: True, not all members of my family are satisfied with my desires. And in the design there is a combination of matte plastic with glossy.

Hyundai CJC-818MV Headset

Thanks to high-quality packaging, the original packaging of the headphones was not damaged at all. The adjustment range is decent enough.
And now about the most important thing – sound quality. The headphones listen to low frequencies, but the upper ones are lost somewhere. So, these same glossy plastic inserts are located in the most unfortunate places (microphone mount, volume control) and therefore they are constantly smeared with fingerprints 🙁 It spins without problems, gropes easily. In general, for 75 cents – this is more than a profitable and successful purchase. Nothing sticks out anywhere, there are no gaps or cracks, all seams are even. And despite the fact that so far there have been no problems with their work, the appearance has deteriorated a little over such a long period of use – the leatherette has cracked in places, and the cord has traces of playing with the cat 🙂 But since this did not affect the work in any way, I I didn’t even think about replacing them.
The length of the wire standard for such products is approximately 1.5 meters. Either the wife can’t hear her series, or the daughter can’t make out what they say in her favorite cartoon. Moreover, the box with the headphones was 2 times smaller than the main box in which it was packed.
As you can see, they are not much different from those pictures that were in the ad. In general, they are suitable for anyone. Headphones are connected via standard 3.5 mm plugs, of which there are 2 – one for headphones, the other for a microphone.

التصنيفات
ads

No keyword Thank you very much!…

I also bought this blachek https://jiji.ng/amuwo-odofin/258-glutathione-pills/injection in China, but it turned out to be not very working. Thanks again. I shoveled the whole Ali, everything is not right. Maybe someone met where to buy and their exact name. Moreover, I checked with 7805 5 the right leg is there With 431, both left legs are https://tonaton.ng/s_274-private-jets also 2.5 each There is no current regulation. What could it be? Without load, the voltage is adjustable. and in the photo you can see that on my converter there is no 18D resistance at all No response to adjustment. I unsoldered it, at first everything was fine, and after 20 seconds the light started flashing, it’s cool of course, but I don’t need it. Everything is super interesting, but my school knowledge is not enough for you, please advise.

No keyword

Thank you very much! how did you find them. But with LM358, I didn’t even understand how to check… No, earlier in the thread Akiril posted a photo with the same one as mine, but everything is like in his photo, only there is no 18D and it does not work. here, and the rest of the denominations as in the photo Hello, I really liked the review. Both fuses burned out, the whole city was searched, and even on Ali https://tonaton.ug/s_51-radio there was nothing like that. I connect a 6.5 V light bulb as a load and at the very beginning it lights up at full incandescence, then it immediately goes out but not quite. Thanks a lot, but the link doesn’t work Why is that? Of course, I prikolhozil others, I need a tester every day, but I already ordered it and I’m waiting. And here in the "bull’s eye", they are. The voltage drops from 6V to 0.6V and the current from 0.23A to 0.07A.